Wilbers Zero Friction Progressive Fork Springs (50mm low) / XT660Z Tenere '08-On
$382.80 CAD
Description
A lowered rear shock is required when installing a lowered Fork Cartridge Kit on a standard height bike.
Please choose either the X-CITE or the X-CITE-PA rear shock.
Wilbers Zero Friction Progressive Fork Springs have several advantages over linear springs. A Progressive Rate Spring has the advantage of a rising rate resistance to compression. The benefit of this is that the spring can be soft enough at the start of the travel to offer a "plush" ride, yet be firm enough at the end of the travel to soak up the big bumps and dramatically reduce nose-dive under deceleration and braking.Don't forget the Fork Oil! You will need 2 Liters of 10wt or 15wt for these springs.
Please note:
10wt oil is recommended for general purpose and for more dirt road riding.
15wt oil is recommended for sport-oriented street riding.
Air chamber is 140mm with springs removed and forks completely compressed.
Instructions for setting air chamber:
1) Remove fork spring and drain old oil.
2) Compress fork fully with spring removed.
3) Add oil until oil level is the prescribed distance from the top of the tube - this is your air chamber.
Piston rods should be pumped several times to dispel any remaining air before final measurement is made.
Customer Ratings & Reviews
Be the first to rate this item!
Reviews
There are no reviews yet.
Be the first to review “Wilbers Zero Friction Progressive Fork Springs (50mm low) / XT660Z Tenere '08-On”
Your email address will not be published. Required fields are marked *
Related products
-
TractiveWilbers 640 Series Rear Shock / Rebound & Preload Adjustments / F800S, F800ST '06-On
$789.77 CAD
